SRX Services Gateway
Reply
Regular Visitor
tomheron1
Posts: 8
Registered: ‎01-08-2011
0

ssl inspection on branch series

Is idp ssl inspection now available on the branch series.

 

thanks Tom

Distinguished Expert
Screenie
Posts: 1,089
Registered: ‎01-10-2008
0

Re: ssl inspection on branch series

Yes its is, see idp chapter in this document: http://www.juniper.net/techpubs/en_US/junos12.1/information-products/topic-collections/security/soft... 

best regards,

Screenie.
Juniper Ambassador,
JNCIA IDP AC WX JNCIS FW SSL JNCIP SEC ENT SP JNCI

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
Trusted Contributor
Flannigan
Posts: 79
Registered: ‎12-16-2011
0

Re: ssl inspection on branch series

Specfically you'll want to investigate the Enhanced/Websense content filter instead of the Integrated/Surfcontrol filter.

Regular Visitor
tomheron1
Posts: 8
Registered: ‎01-08-2011
0

Re: ssl inspection on branch series

Thanks

 

I looked at the link provided nd one of the links of this (copied in below gave a feature table however this gives the opposite answer to you.

If I look at the link below under the IDP support table section. It says that SSL inspection is not supported on the 1xx, 2xx or 5xx 6xx series. Am I missing something here?

 

thanks Tom

 

http://www.juniper.net/techpubs/en_US/junos12.1/information-products/topic-collections/security/soft...

 

 

Distinguished Expert
Screenie
Posts: 1,089
Registered: ‎01-10-2008
0

Re: ssl inspection on branch series

May 12.1 features aren't listed there yet. 

 

http://www.juniper.net/techpubs/en_US/junos12.1/information-products/topic-collections/security/soft... 

 

chapter 30   page 1013. It relay shows how to configure the feature.

best regards,

Screenie.
Juniper Ambassador,
JNCIA IDP AC WX JNCIS FW SSL JNCIP SEC ENT SP JNCI

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
Regular Visitor
tomheron1
Posts: 8
Registered: ‎01-08-2011
0

Re: ssl inspection on branch series

Thanks again screenie

 

However I didn't see any mention of branch support for these in the link that you posted and when I went to thefeature support reference it states that the branch series does not support this.

How sure are you that this is definitely supported in 12.1 for branch series SRX.

 

thanks again for your help

 

Tom

 

http://www.juniper.net/techpubs/en_US/junos12.1/information-products/topic-collections/security/soft...


Distinguished Expert
Screenie
Posts: 1,089
Registered: ‎01-10-2008
0

Re: ssl inspection on branch series

H'mmm you make me doubt. One way to find out I think: let's try it. I'll do that somewhere next week.

best regards,

Screenie.
Juniper Ambassador,
JNCIA IDP AC WX JNCIS FW SSL JNCIP SEC ENT SP JNCI

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.