ssl inspection on branch series

[tomheron1]

Is idp ssl inspection now available on the branch series.

thanks Tom

[Screenie]

Yes its is, see idp chapter in this document: http://www.juniper.net/techpubs/en_US/junos12.1/information-products/topic-collections/security/soft... 

[Flannigan]

Specfically you'll want to investigate the Enhanced/Websense content filter instead of the Integrated/Surfcontrol filter.

[tomheron1]

Thanks

I looked at the link provided nd one of the links of this (copied in below gave a feature table however this gives the opposite answer to you.

If I look at the link below under the IDP support table section. It says that SSL inspection is not supported on the 1xx, 2xx or 5xx 6xx series. Am I missing something here?

thanks Tom

http://www.juniper.net/techpubs/en_US/junos12.1/information-products/topic-collections/security/soft...

[Screenie]

May 12.1 features aren't listed there yet. 

http://www.juniper.net/techpubs/en_US/junos12.1/information-products/topic-collections/security/soft... 

chapter 30   page 1013. It relay shows how to configure the feature.

[tomheron1]

Thanks again screenie

However I didn't see any mention of branch support for these in the link that you posted and when I went to thefeature support reference it states that the branch series does not support this.

How sure are you that this is definitely supported in 12.1 for branch series SRX.

thanks again for your help

Tom

http://www.juniper.net/techpubs/en_US/junos12.1/information-products/topic-collections/security/soft...

[Screenie]

H'mmm you make me doubt. One way to find out I think: let's try it. I'll do that somewhere next week.