Hi,aweck,
thank you for your response,however,I don't known what does mean as the output on SRX3600,as:
SRX3600-F1> show snmp mib walk decimal jnxJsSPUMonitoringCPUUsage
jnxJsSPUMonitoringCPUUsage.7 = 0
jnxJsSPUMonitoringCPUUsage.33 = 0
-SRX3600-F1> show snmp mib walk decimal jnxOperatingDescr
jnxOperatingDescr.1.2.0.0 = node1 midplane
jnxOperatingDescr.2.5.0.0 = node1 PEM 0
jnxOperatingDescr.2.6.0.0 = node1 PEM 1
jnxOperatingDescr.2.7.0.0 = node1 PEM 2
jnxOperatingDescr.2.8.0.0 = node1 PEM 3
jnxOperatingDescr.4.2.0.0 = node1 Fan Tray
jnxOperatingDescr.4.2.1.0 = node1 Fan 1
jnxOperatingDescr.4.2.2.0 = node1 Fan 2
jnxOperatingDescr.4.2.3.0 = node1 Fan 3
jnxOperatingDescr.4.2.4.0 = node1 Fan 4
jnxOperatingDescr.4.2.5.0 = node1 Fan 5
jnxOperatingDescr.4.2.6.0 = node1 Fan 6
jnxOperatingDescr.4.2.7.0 = node1 Fan 7
jnxOperatingDescr.4.2.8.0 = node1 Fan 8
jnxOperatingDescr.4.2.9.0 = node1 Fan 9
jnxOperatingDescr.4.2.10.0 = node1 Fan 10
jnxOperatingDescr.7.14.0.0 = node1 FPC: SRX3k SFB 12GE @ 0/*/*
jnxOperatingDescr.7.15.0.0 = node1 FPC: SRX3k 2x10GE XFP @ 1/*/*
jnxOperatingDescr.7.18.0.0 = node1 FPC: SRX3k 16xGE SFP @ 4/*/*
jnxOperatingDescr.7.21.0.0 = node1 FPC: SRX3k SPC @ 7/*/*
jnxOperatingDescr.7.24.0.0 = node1 FPC: SRX3k NPC @ 10/*/*
jnxOperatingDescr.7.25.0.0 = node1 FPC: SRX3k NPC @ 11/*/*
jnxOperatingDescr.8.14.1.0 = node1 PIC: 8x 1GE-TX 4x 1GE-SFP @ 0/0/*
jnxOperatingDescr.8.15.1.0 = node1 PIC: 2x 10GE-XFP @ 1/0/*
jnxOperatingDescr.8.18.1.0 = node1 PIC: 16x 1GE-SFP @ 4/0/*
jnxOperatingDescr.8.21.1.0 = node1 PIC: SPU Cp-Flow @ 7/0/*
jnxOperatingDescr.8.24.1.0 = node1 PIC: NPC PIC @ 10/0/*
jnxOperatingDescr.8.25.1.0 = node1 PIC: NPC PIC @ 11/0/*
jnxOperatingDescr.9.3.0.0 = node1 Routing Engine 0
jnxOperatingDescr.10.2.1.0 = node1 FPM Board
jnxOperatingDescr.12.3.0.0 = node1 CB 0
as the above information for the node1,are the same with node0?
And for example,I want to know the OID for SPU,RE-CPU,NPU,What should I do?
thank you very much!