Hi,
I am in the same situation that you are. I have 2 SRX650 working in an active/passive cluster and 2 subnets going to a loadbalancer. I managed to make this work by tagging the interface with these 2 vlans:
set interfaces reth3 vlan-tagging
set interfaces reth3 redundant-ether-options redundancy-group 1
set interfaces reth3 unit 0 vlan-id 31
set interfaces reth3 unit 0 family inet address 10.15.22.2/24
set interfaces reth3 unit 1 vlan-id 32
set interfaces reth3 unit 1 family inet address 10.15.23.2/24
However, for ease of management, I would like to have flexible vlan tagging so that I could have vlan 31 untagged on reth3 and vlan 32 tagged on the same interface.
Have you managed to do it ?
I saw on the documentation that flexible-vlan-tagging enabled this feature, however, this command does not exist for reth interfaces, only for physical interfaces.
Does anybody know a work around? or is it still not possible for now (I am running 10.1R1.8 version - the current latest version)?
Any help would be greatly appreciated.
Lili.