SSL VPN
Reply
tcp
Contributor
tcp
Posts: 28
Registered: ‎02-15-2012
0

Auto-allow application servers not working

Hi,

I have made a role and i have added a server(ip with all ports: a.b.c.d:*) to SAM for that role. In SAM -> Options i have checked Auto-allow application servers.

When i have tried to connect to it through SA4000 in the SAM windows i got an ACL check failed message.

When i have unchecked Auto-allow application servers and i have made the resource policy in SAM for that server it worked without problems.

What might be the possible cause for that? I use System Version 7.1R5 (build 19757)

I would appreciate your help on this issue.

Regards.


   
Moderator Moderator
Moderator
RKB
Posts: 152
Registered: ‎09-22-2008
0

Re: Auto-allow application servers not working

When you get the error please check the user access log to confirm if there is any issue with ACL.

tcp
Contributor
tcp
Posts: 28
Registered: ‎02-15-2012
0

Re: Auto-allow application servers not working

Unfortunately i cannot check it anymore because i was pressed to give it in production and i had to let it with defined Resource Policy.

Regards,

Traian.

Moderator
zanyterp
Posts: 2,332
Registered: ‎11-19-2007
0

Re: Auto-allow application servers not working

There was an issue identified around the system you are using; it is fixed in a later 7.1 OS
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.