04-16-2012 09:24 PM
I have buy new MAG4610. So my question can i use this device for both feature as per title above at the same time? Thanks and appreciate someone feddback.
04-16-2012 11:43 PM
We can either use the it as a UAC or SSL VPN (change personality). IT can be used as a SSL vpn and UAC at the same time.
please mark this post as 'accepted solution' if this answers your question that way it might help others as well, a kudo would be a bonus thanks
04-17-2012 07:34 AM
The answer is "No".
You can install IVE OS(Secure Access) or UAC OS(Access Control) in one device.
If you install IVE OS, the device is SSL VPN.
If you install UAC OS, the device is UAC.
It's impossible to be a SAG(Secure Access Gateway) and ACG(Access Control Gateway) at the same time.
04-17-2012 10:19 PM
The last answer posted by Joseph is right.
MAG4610 comes with a fixed MAG SM-160 Application Blade in which both SSL VPN and UAC OS are loaded with factory version settings like 4.1 or 4.2.
When we configure the device , we can configure either SSL VPN or UAC but both the services cannot be run simultaneosly.
If you load as SA option it install SSL VPN OS and boots up as SA
If you load as UAC option it install UACOS and boots up as an IC.
If you are looking for once chassis running with both UAC and SA device then you need to use MAG 6610 or 6611 chassis where you can have multiple Application module sin which you can run UAC and SA services seperately on each blade.
Hope this calrifies your query.
04-18-2012 06:22 AM
It is worth noting that you can factory default the box and change it's "pesonality" IE - run it as an SSL-VPN or run it as a UAC box. Not to good for production - but handy for demo / testing.
04-18-2012 07:40 PM
each blade on the system can only run one version at a time. if you have 2 blades, one can be an SA and the other IC. if you only have 1 blade though, yes, it is just one type
04-19-2012 01:06 AM
Many thanks for all the feedback. Another help if someone can give the url (KB) / doc how to setup MAG4610 as SSL VPN (step-by-step). I try to search in KB but not found any step-by-step. Below is the my network.
Internal LAN (MAG4610) ---->SSG5 ----> Internet
For your information i dont have any server. It just a simple network and to make sure i can remote from anywhere to my Internal LAN. Hope someone can help me. Thanks