05-11-2008 12:43 PM
I need to upgrade a cluster of two SA 2000 (active/standby). I need to know which is the best procedure.
I'll do in this way:
Can you agree with me??
05-12-2008 09:13 AM
There's not really any need to shut them down.
Just disable the cluster (otherwise known as 'breaking the cluster'), then ensure you can then connect as admin to each device.
Upgrade the OS on each device in turn, ensuring they come up again ok after a reboot.
Enable the cluster again. Check the cluster properties and the event log to make sure they are both ok.
05-12-2008 10:24 AM
Why do it that way? If it is a true Active/Passive cluster, you can upgrade the firmware without shutting down the passive node.
You connect to the Web GUI (with the VIP IP). Make sure you make a local backup of your configuration (Maintenance > Archiving > Local Backups). Then start the firmware upgrade (Maintenance > System > Upgrade/Downgrade). The cool thing is that all connections will be switched to the Passive node while the Active node is upgraded. Once that is complete, the connections will be switched back to the Active node and the Passive node will be upgraded. You can upgrade the cluster while users are connected!
We do this on our SA4000 Active/Passive cluster and have never had a problem!
05-12-2008 01:36 PM
my customer use clients with NC and the distribution of new NC is not so simply.
So we need to preserve an unit with the older version: we see that there are no problem to connect to IVE with new NC version.
I'll try to explain to my costumer this procedure.
Thanks to your help