06-29-2011 10:01 AM
I've got an issue with pulse coming up with a blank window - no option to create a connection at all - just the "logs" and "exit" options under the menu at the top. This is happening on two Windows 7 64-bit machines. One is a virtual machine running in VirtualBox, the other is a Lenovo OEM install.
On two other machines (fairly fresh OEM installs of Windows 7 64-bit) all is working fine.
I've tried the following:
1) Remove and reinstall the software (with an intervening reboot)
2) Remove the Juniper registry entries and folders under c:\program files (x86)
3) Remove the service (sc delete in a command prompt)
4) Download the MSI installer for 64-bit and run that (it gets halfway through then rolls back)
5) Various other things I can't remember.
Short of throwing the laptop out into the car park and driving over it, does anyone have any bright ideas?
06-29-2011 06:58 PM
I have the same issue on a computer right now. Base Win7 64-bit, and the Pulse client is 'empty'.
It won't connect to anything, because you can't add a connection, theres simpy no options.
I've similar things as wel, uninstalled, cleaned registry, updated Java, rebooted, this and that.
Love to find a solution, I imagine it will happen to other machines on a big deployment, and want a fix for this.
06-30-2011 12:12 PM
Yah, users can create their own connections, and it works on other machines.
Trying to find out why one machine here simply won't install Pulse correct.
Might have to open a case
06-30-2011 12:48 PM
07-20-2011 08:20 AM
Hi - it is affecting two machines, unfortunately. One is Windows 7 64 bit, the other is Windows 7 32 bit. We've other machines that seem to work fine.
The user installing is an admin on the local machine, I've taken the machine off the domain and had the same result, and I've created a new local user - again with the same result.
Logged a TAC case a few days ago and eventually had a call with the guy, but unfortunately his only suggestion is to re-image the two machines and try again. They were quite responsive, but didn't know a lot I think.
I've removed AVG anti-virus, disabled Windows Defender, removed all Juniper folders I can find on the disk, and removed all Juniper registry entries. Also ran the Pulse Cleaner to clean up the machine, but to no avail.
In desperation, I'm going to upgrade the SA to 7.1R3 and see if I get a different package downloaded successfully. Failing that, I will have to re-image the machine, and probably never find out what caused this
07-22-2011 10:30 PM
Is the re-image what ultimately fixed it?
Do you remember, off-hand if you checked, if dsAccessService.exe was running?
I have seen this a few times on my machine (XP) while doing testing when there was a conflict with another component (OAC typically) and was fixed after a remove, clean, and re-install.
Does/did the same happen when using the msi install rather than through the browser?
07-25-2011 11:49 AM
Hi zanyterp -
Thanks for the ideas!
When I wave my mouse over the Pulse icon in the system tray, I see a message that says "Pulse: Access service not running". So I go into the Control Panel and into Services and I see that "Juniper Unified Network Service" (if I remember the name right) is set to automatic startup, but is not running.
When I tell JUNS to start up, it starts OK. I then wave my mouse over the Pulse icon in the sytem tray and it just says "Pulse: "
So that seems to be a part of the issue. What other machines have is a message saying "Pulse: no connections", but I don't get that. So I think Pulse must need to read its connections in from somewhere.
What is OAC, by the way? Is that Odyssey? If so, I have never had that installed, so assume it isn't a part of the issue.
07-25-2011 11:52 AM
@zanyterp: by the way, the MSI installer doesn't work either. It starts 'copying files' and then starts 'rolling back action' - it eventually says it was interrupted somehow during the install but doesn't give any details. I've tried the three most recent MSI installers and they all do the same thing. I don't know if there's a log file anywhere that says what caused the interruption, but I can't find anything that indicates what the cause was.
07-26-2011 09:03 AM
hi @ amullheirn,
Yes, OAC refers to the Odyssey Access Client.
If you are not able to install using the MSI file, there is something else occuring; but i don't know what/where (i haven't seen that one yet).
does your events/system/application log show you any reason for the failure when running the MSI? can you add/remove other drivers/adapters without issue?
07-26-2011 12:53 PM
I'm having the exact same issue on two of my workstations. One is a Win7 x64 Pro system that is our standard corporate image. User upgraded to the 7.1r2 client build after our j4500 firmware was updated. The next day a contractor who has never used Juniper prior had the same issue after installing pulse. I had him run the pulse cleaner tool as supplied by support and reinstall. Same issue. I'm attaching excerpts from his windows event logs.
Specifically he is getting an msiexec error.
Manager Add-On. Product Version: 2.0.10059. Product Language: 1033. Manufacturer: Juniper Networks. Installation success or error status: 1603.Information,25/07/2011 4:59:08 PM,MsiInstaller,11708,None,Product: Junos Pulse Netshim/Tunnel Manager/IPSec Manager Add-On -- Installation failed.
08-13-2011 05:27 PM
I have more computers running into this issue, JTAC isn't sure why it happens, they ultimately say reinstall Windows, which is a bit extreme to get a VPN client working.
Has anyone found any other things to try?