04-12-2012 06:39 AM
Juniper update your docuemtation for 7.2.
If you try to install on SA2000 will get a bad error message, current version is newer. The serial port tells me Hardware plateform not supported. Page 37 of manual has SA2000 refenerce
04-12-2012 08:23 PM
As per my understanding SA 2000 will not support 7.2 R1 and hence we dont see SA 2000 in the SA hardware requirements section of the 7.2R1-supportedplatforms guide.
You can get this information by accessing the below URL.
I feel Junos Pulse secure Access Service does not support SA2000 appliances, as these hardware models are end of lifed (EOL) and i believe that this should be documented in the 7.2 R1 release notes however its missing.
I will discuss this internally and confirm you on this
04-12-2012 08:51 PM
Thank you for the information on the bad message (that the currently installed version is newer); I will see if I can replicate this for internal investigation further.
But, yes, the SA2000 is not supported for 7.2; only the SA2500, 4500, 6500, and all MAG units are supported. Was it the admin guide that was showing that the SA2000 works for 7.2?