SSL VPN
Reply
New User
Jim_St
Posts: 2
Registered: ‎05-12-2008
0

SA700 and NetWare

I'm currently in the process of configuring my SA700 system that I have just received.  Although this s getting a bit ahead of myself, does anyone know if I can access Novell NetWare 6.5 folders/files via SA700 remote access?

 

thanks.

 

Jim. 

Juniper Employee
Skywalker
Posts: 13
Registered: ‎05-12-2008
0

Re: SA700 and NetWare

If you can mount the folders via FTP, HTTP, NFS or CIFS then you should be able to do this with the SSL VPN box.  Otherwise you would need to run Network Connect and connect from the remote node directly tot he NetWare server.  You may be able to setup a local service that will provide access to the NetWare server using one of the above mentioned protocols so that the IVE can see and serve the content via it's web portal.  What protocol does NetWare use to serve up folders?
Luke Skywalker
Sr. Jedi Knight
New User
Jim_St
Posts: 2
Registered: ‎05-12-2008
0

Re: SA700 and NetWare

Thanks for your response... NetWare does connect via IP.  After a little more searching, I believe what I may need to do is install the NetWare client on remote workstations that will require this access.

 

Jim

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.