SSL VPN
Reply
Trusted Contributor
michael.saw
Posts: 1,048
Registered: ‎09-26-2011
0

What do we need for MAG supporting 12,000 users?

Hi all,

 

What is the BOM if we need to deploy a MAG solution for 12,000 users?

1 x MAG6611

3 x SM360

3 x (2 x ADD-2KU license)

 

Can we achieve redundancy here? Cluster the 3 x SM360 as A-A-P (Active-Active-Passive) or A-A-A?

Thanks!

Michael
JNCIA-JUNOS, JNCIS-ENT/SEC, JNCIP-ENT
(CCNA, ACMP, ACFE, CISE)
"http://www.thechampioncommunity.com/"
CONNECT EVERYTHING. EMPOWER EVERYONE.
Share & Learn. Knowledge is Power.

"If there's a will, there's a way!"
Trusted Expert
kalagesan
Posts: 376
Registered: ‎08-09-2011
0

Re: What do we need for MAG supporting 12,000 users?

Hi Michael,

 

yes you can achive redunancy using the below MAG solution  however it needs to deployed as Active-Active cluster and not  not as active-Passive cluster.

 

1 x MAG6611

3 x SM360

3 x (2 x ADD-2KU license)

 

As per my knowledge we dont support active-passive with more than 2 nodes hence active-active cluster would be the ideal one to run with where you can have external load balancer to balance the load and route traffic accordingly.

 

But if you have 10K users you delpoy an 2 node active.passive cluster with MAG 360

 

Regards,

Kannan

 

 

Moderator Moderator
Moderator
SVK
Posts: 193
Registered: ‎08-22-2011
0

Re: What do we need for MAG supporting 12,000 users?

Hi Michael,

 

Considering the number of users I would recommend an active-active cluster setup.

 

Regards,

Vijay

Moderator
zanyterp
Posts: 2,276
Registered: ‎11-19-2007
0

Re: What do we need for MAG supporting 12,000 users?

To have more than 2 nodes requires an active/active cluster.
That would give you the 12k users but I'm not sure on the redundancy factor at that level (if that is a concern)
Trusted Contributor
michael.saw
Posts: 1,048
Registered: ‎09-26-2011
0

Re: What do we need for MAG supporting 12,000 users?

Should we propose the following for Active-Active:
1 x MAG6611
2 x SM360
2 x (1 x ADD-5KU license, 1 x ADD-1KU license)

Is it okie?
Coz the max user for SM360 is 10,000 (not 12,000)...
Thanks!

Michael
JNCIA-JUNOS, JNCIS-ENT/SEC, JNCIP-ENT
(CCNA, ACMP, ACFE, CISE)
"http://www.thechampioncommunity.com/"
CONNECT EVERYTHING. EMPOWER EVERYONE.
Share & Learn. Knowledge is Power.

"If there's a will, there's a way!"
Moderator
zanyterp
Posts: 2,276
Registered: ‎11-19-2007
0

Re: What do we need for MAG supporting 12,000 users?

Yes, that should be fine.

With the caveat that if something were to happen, the one node could only handle 10k of the 12k users (if they were all on at one time for the time to get the RMA back)

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.