SSL VPN
Reply
Contributor
imanenvoy
Posts: 42
Registered: ‎12-28-2010
0

active/active how disruptive for end users?

Looking at setting up a couple of SAs in A/A. I understand that any address pools need to be split between the 2 devices and static routed to each.  So if an active box goes down any users connected aren't going to auto-connect to the other box, correct?

What about users that are using just the SSL VPN or SAM will they see a disruption in service?

 

Any other gotchas or issues with an A/A?

 

Thanks.

Recognized Expert
kenlars
Posts: 420
Registered: ‎03-24-2008
0

Re: active/active how disruptive for end users?

There is no automatic failover of users in an active/active cluster.  Any failover or load-balancing must be done by an external load balancer.

 

Assuming this exists, I would expect SAM or rewriting apps to work without interruption.  However, NC will not failover because of a change in address pools. 

 

Ken

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.