ScreenOS Firewalls (NOT SRX)
Reply
Contributor
gr33ndata
Posts: 69
Registered: ‎02-02-2008
0

Add Users to the Authentication Table

[ Edited ]

As far as I know, Juniper UAC applies its policies on the Infranet Enforcer (Juniper Firewall), by Adding/Removing users to the Firewall's User Authentication Table. So my question is, what's the command used to Add/Remove users from the Firewall Authentication Table.

 

I am not asking here about Adding/Removing users to the Users Database on the Firewall, but what I want to do, is to be able to Alter the Authentication Table, i.e the one that is displayed by using the following command "get auth table" and/or "get auth table infranet".

 

One more question as well, are there plans for ScreenOS to support XML Commands or any similar technology

Message Edited by gr33ndata on 06-30-2008 03:10 PM
Gr33n Data
JNCIS-FWV, JNCIA-IDP

@gr33ndata

http://gr33ndata.blogspot.com/
Recognized Expert
PentinProcessor
Posts: 258
Registered: ‎11-06-2007
0

Re: Add Users to the Authentication Table

Hello,

This article has some troubleshooting tips related to the auth table:  KB11352 - How to Troubleshoot Infranet Resource Policy Problems

 

Questions:

- What specifically do you want to alter in the Auth table?

- What do you want to accomplish with ScreenOS supporting XML?

Regards,

Josine 

 

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.