Screen OS

last person joined: 8 months ago 

This is a legacy community with limited Juniper monitoring.

  • 1.  Can SSG-140 transfer traffic in case it?

    Posted 05-23-2016 18:48

    Hello all,

    I want to know whether SSG-140 transfer traffic in case below captured picture.

     

    As you can see the picture, SSG-140's IP is 2.2.2.2

    Source IP is 1.1.1.1, and Destination IP is 3.3.3.3

     

    network.JPEG

     

     

    From now on, I've done SSG-140 in case that destination IP was same as SSG-140's.

     

    But now I have to configure that everything(Source, Destination and Firewall's IP) is same...

     

    To sum up, my question is ...

    1. Even though every IP is not same, can I configure it?

     

    configuring.JPEG

    Is it right setting?;; Please check guys.

     

    2. I'm wondering if I configure L2 mode or Route mode...? 

    Should I configure vlan?...

     

    Could you advise me how to set up the machine?

    Regards,

    SK.



  • 2.  RE: Can SSG-140 transfer traffic in case it?

    Posted 05-23-2016 19:16

    1: IP 2.2.2.2 configured anywhere on the firewall?

    2: If it's configured then, it belongs to which zone.

     

     

    thanks,

    Vikas



  • 3.  RE: Can SSG-140 transfer traffic in case it?

    Posted 05-23-2016 19:19

    Hi, thank you for reply.

    2.2.2.2 is  located in v1-untrust zone!!

     

    Could you continously reply me?

     


    #vikassingh


  • 4.  RE: Can SSG-140 transfer traffic in case it?
    Best Answer

    Posted 05-23-2016 19:49

    Please refer KB http://kb.juniper.net/InfoCenter/index?page=content&id=KB11910&actp=search , point 7 . This should match with your deployement.

     

    Thanks,

    Vikas



  • 5.  RE: Can SSG-140 transfer traffic in case it?

    Posted 05-23-2016 19:38

    If I send you mail that includes IP information and policies, could you advise me..?!

    Regards,

    SK.