Screen OS

last person joined: 8 months ago 

This is a legacy community with limited Juniper monitoring.

  • 1.  Configure SSG140 with 2ADSL Cisco routers

    Posted 08-01-2009 05:27

    hello all

     

    we are planning to implement one juniper
    SSG140 in Data Center for 2 organizations AZ company and OZ company     Each

    company have their own internet connection with their own branches as its show in the diagram. our requirements is:

     

    Connect 2 Cisco ADSL routers to the SSG140 so all traffic it will be through the firewall.

     

    Configure VPN site to site for each company with their own branches through ssg140.

     

    Is it possible to configure this requirements with SSG140?

    And if it yes how we can do it?

     

     

    note: please finde the below link for the network digram.

     

    http://img102.herosh.com/2009/08/01/696970253.jpg

     

     

    thanks

    Best Regards.

     

     

     

     



     



  • 2.  RE: Configure SSG140 with 2ADSL Cisco routers

    Posted 08-01-2009 07:28

    Hi:

     

    You can use Policy Base Routing (PBR), it allows you redirect the traffic to a router to another depending on the destination of the packet, for instance. Read the Configuration Guide of the appliance, there comes very well explained.

     

    Regards



  • 3.  RE: Configure SSG140 with 2ADSL Cisco routers
    Best Answer

    Posted 08-03-2009 19:19
    a easier and cleaner way is to use multiple virtual routers and keep everything seperate from each other work slike a champ and we do it lal  the time at our data center
    Message Edited by WPJ on 08-03-2009 10:19 PM


  • 4.  RE: Configure SSG140 with 2ADSL Cisco routers

    Posted 08-10-2009 08:05

    hello all

     

    thanks for your support, i will work around your Suggestions and i will let you know the update.

     

     

    thanks.