So I am reading the manual, Vol 14, Chap 2 on 'Configuring an IPv6 router'.
I have RADVD in Centos 5 running, and I want to replace that with the SSG5. So I have some understanding on setting up the RA service....
So here is a piece of my radvd.conf file:
interface eth1.16
{
AdvSendAdvert on;
MinRtrAdvInterval 3;
MaxRtrAdvInterval 10;
prefix 2607:f4b8:3:9::/64
{
AdvOnLink off;
AdvAutonomous on;
AdvRouterAddr on;
AdvPreferredLifetime 20;
AdvValidLifetime 30;
};
route ::/0
{
};
};
I went to Network > Interfaces > IPv6 and selected 'router' and supplied a unicast address for the interface:
2607:f4b8:3:9:9254:5400:0:131
This created a 'default' entry in the 'Prefix list' option.
But I am sitting with Wireshark on the subnet, and NOT seeing any RA packets.
So what else is needed?
Anyone here doing IPv6 and have their own /48 allocation?