11-22-2009 01:04 AM
I wanted to find if there is a document on configuring WIndows 7 machine for dialup vpn supported by Juniper SSG140. Since the Netscreen-Remote has reached EOL and no more versions are going to be released for Windows 64-bit systems and WIndows 7, I think there should be another client available or atleast a document to do this.
11-22-2009 12:09 PM
Please use the following KB which will helps to create the Dial VPN by using L2Tp with IPsec tunnel.
Use the same configuration but please use certificate as mention in the above links , L2TP with IPsec tunnel using pre-share key will not work with Juniper firewall.
11-25-2009 08:00 AM
Hi! Sorry for the delay. Yes, I use NCP to connect SSG series. Yes, NCP allow PSK and access to multiple networks. From the developer Site you can download a demo - version of that. You can than test the software.
12-28-2009 06:22 PM
The NCP client is like 144.00 USD. Is that per user or is it like Netscreen remote where you buy a 10, 100, etc user package? For our customers, 144 dollars times 10 users is going to be more money than they spent on the firewall.
Any other solutions? Shrewsoft looks nice but it says absolutely nothing about supporting windows 7.
09-23-2014 05:57 AM
I have checked the information on above website their Dialup VPN configuration is not working it gives error in phase1. Please help to configure Dialup VPN with ssg140 screenos 6.3
09-23-2014 09:51 PM
Refer to http://kb.juniper.net/InfoCenter/index?page=conten
You can also try NCP client ==> http://kb.juniper.net/InfoCenter/index?page=conten