ScreenOS Firewalls (NOT SRX)
Reply
Contributor
blueseabin
Posts: 56
Registered: ‎11-03-2008
0

Firewall port failover failure

In the ScreenOS 5.4.r12.0, create a zone; and bind 2 ethernet ports into this zone.Implement the redundant Port for these 2 ports. Did not setup the holddown parmeters in these ports before bind to one redundant ports.

 

My questions are:

 

1.  When using "exec failover revert ", which is failure, by checking the chapter 11. it seems to be that command is only work in Untrust Zone.

 

2. if did not setup the holddown parameters, what behavior could be for the situation when one active port fail,

 

thanks for any feedback.

 

BR

 

Bin

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.