ScreenOS Firewalls (NOT SRX)
Reply
New User
PatMcCarten
Posts: 1
Registered: ‎12-05-2008
0

How to documentation for configuring SSG-5 and VPN authentication using Windows Active Directory

Hi Folks,

 

I'm new to Juniper and in search of documentation to enable remote users to use the Windows Native VPN Client to connect to our corporate LAN. I'd like users to use the native VPN client and authenticate using their Windows Domain credentials. My assumption is that this is a very basic configuration, but I can't find supporting documentation. Anyone know where it is? Or can you advise on how we'd set it up? Our config is as follows:

 

- Windows Active Directory - 1 domain, flat topology, mixed Windows client and server environment

- Clients will be running XP and Vista

- We're running the Juniper/Netscreen SSG-5 device, ver. 5.4.0r3a

 

Thanks...Pat

Contributor
DerMike
Posts: 15
Registered: ‎03-30-2008

Re: How to documentation for configuring SSG-5 and VPN authentication using Windows Active Directory

There are at least two guides to accomplish this task.

 

The official one

 

An unofficial one

 

Regarding the AD authentication you have to switch from the internal L2TP authentication server to an external LDAP. When you follow the guides you only have to define the IKE certificate users in the firewall and do not have to mark them as L2TP users.

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.