ScreenOS Firewalls (NOT SRX)
Reply
Visitor
pearlr
Posts: 5
Registered: ‎06-10-2008
0

IPSec VPN from Windows Mobile 6.0 to NetScreen firewall

I am attempting to set up a VPN tunnel from my AT&T Tilt which runs Windows Mobile 6.0 using the built-in VPN client and my cellular connection.

 

Has anyone accomplished this? Or can anyone point me to some documentation on how to accomplish this?

 

All help will be greatly appreciated.

Trusted Expert
Kashif-rana
Posts: 417
Registered: ‎01-29-2008
0

Re: IPSec VPN from Windows Mobile 6.0 to NetScreen firewall

Hi,

 

u can try this document http://kb.juniper.net/KB10939

 

Hope this helps u

 

Kashif Rana
JNCIE-SEC, JNCIE-ENT, JNCIE-SP, JNCIS(FWV,SSL),JNCIA(IDP,AC,WX),BIG IP-F5-LTM, CCNP
----------------------------------------------------------------------------------------------------------------------------------------

If this post was helpful, please mark this post as an "Accepted Solution".Kudos are always appreciated!
Visitor
pearlr
Posts: 5
Registered: ‎06-10-2008
0

Re: IPSec VPN from Windows Mobile 6.0 to NetScreen firewall

Kashif,

Thanks for your reply, but this tech note applies to Windows XP and will not work in a Windows Mobile configuration. I am running Windows Mobile 6.0 Professional on and AT&T Tilt.

Visitor
pearlr
Posts: 5
Registered: ‎06-10-2008
0

Re: IPSec VPN from Windows Mobile 6.0 to NetScreen firewall

DOes anyone out there have a solution that I can try?
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.