ScreenOS Firewalls (NOT SRX)
Reply
Contributor
hadywahl
Posts: 45
Registered: ‎05-23-2008
0
Accepted Solution

Memory Address Test Failed

Hi Everyone,

This message appears on the Firewall device 'Memory Address Test Failed' when trying to boot it up.This message is being displayed on connecting through the console.

Distinguished Expert
Raheel
Posts: 414
Registered: ‎06-18-2008
0

Re: Memory Address Test Failed

it could be happen with different sort of reasons, is this causing you to perform firewall activities?

 

what image are you using, and scenario, that would help us to analyze the problem.

 

thanks

Raheel Anwar

 

Follow me on Twitter @anwar_raheel

--
If this post was helpful, please mark this post as an "Accepted Solution".
Kudos are always appreciated!
Trusted Contributor
Arkus
Posts: 70
Registered: ‎02-11-2008
0

Re: Memory Address Test Failed

 

Hi hadywahl,

 

Can you edit and paste the full boot up message here? Also, what version of software are you using, and are you seeing any problems (i.e, firewall fails to bootup).

 

Regards,

A

Contributor
hadywahl
Posts: 45
Registered: ‎05-23-2008
0

Re: Memory Address Test Failed

Hi everyone,

This is the message the output of the firewall device from console when trying to boot up.I hope this piece of information will be of help.

 

 

ScreenOS Boot ROM  v3.32 (Build 366D)

(c)1997-2000 Netscreen Technologies, Inc. All rights reserved

 

RM7000 CPU, Revision 33

16KB I cache, 16KB D cache

256KB Secondary Cache

Detect SDRAM (0C,0A,04,02)......   256MB SDRAM, 2 Banks

SRAM OK!

Config Ethernet Device

Done!

 

NetScreen Technologies, Inc

NetScreen 500 Load Software

Copyright, 1997-2001

Version 1.9

 

Hit any key for Boot/Diag mode

Hit any key for Boot/Diag mode

Hit any key for Boot/Diag mode

Hit any key for Boot/Diag mode

 

Load System Image From Flash

********ignore image authentication!

Load image to address 0x80060000

 

 Start loading...

....................................................................

Done.

   

Juniper Networks, Inc

NS-500 System Software

Copyright, 1997-2004

 

Version 5.00r9.0

Init Heap (1660010/cf9fbf0,32, 00000000/00000000)

Rev.D Sagittarius board

GT64120 revision id: 0x11

Load NVRAM Information ... (5.0)Done

Detected SRAM memory size 1048576

Memory Test: b7800000,100000 .......Memory Address Test failed at b7800004: b780

0044

Memory Address Test failed at b780000c: b780004c

Memory Address Test failed at b7800014: b7800054

Memory Address Test failed at b780001c: b780005c

Memory Address Test failed at b7800024: b7800064

Memory Address Test failed at b780002c: b780006c

Memory Address Test failed at b7800034: b7800074

Memory Address Test failed at b780003c: b780007c

Memory Address Test failed at b7800084: b78000c4

Memory Address Test failed at b780008c: b78000cc

 

Trusted Contributor
Arkus
Posts: 70
Registered: ‎02-11-2008
0

Re: Memory Address Test Failed

 

 

Hi hadywahl,

 

It looks like the hardware has failed. If you have active support, I would open a JTAC case.

 

Regards,

A.

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.