ScreenOS Firewalls (NOT SRX)
Reply
Contributor
Raj909
Posts: 45
Registered: ‎10-20-2008
0

Memory Resources High

We have an SSG5 running 5.4.r7.0 and having extremely high ping response times.  However, getting through the VPN tunnel is not a problem.  Checking the WebUI Alarms, the following error is all over -

 

Cannot allocate 40960 bytes of memory


What is the fix and why did this all of a sudden happen?  The device has been online for 438 days.

 

Thanks

Trusted Expert Trusted Expert
Trusted Expert
WL
Posts: 790
Registered: ‎07-26-2008
0

Re: Memory Resources High

The error means that memory is low on the box. Do you have many UTM features turned on for this firewall?

 

 

****pls click the button " Accept as Solution" if my post helped to solve your problem****
Contributor
Raj909
Posts: 45
Registered: ‎10-20-2008
0

Re: Memory Resources High

No UTM features installed or enabled.
Trusted Expert Trusted Expert
Trusted Expert
WL
Posts: 790
Registered: ‎07-26-2008
0

Re: Memory Resources High

I think that you have a memory leak for some reason. It may be easier for you to open a JTAC case to look into that as memory troubleshooting is pretty involved.
****pls click the button " Accept as Solution" if my post helped to solve your problem****
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.