ScreenOS Firewalls (NOT SRX)
Showing results for 
Search instead for 
Do you mean 
Reply
Contributor
Posts: 243
Registered: ‎11-26-2007
0 Kudos

Monitoring active firewall performance (throughput)

[ Edited ]

Hi All,

 

How to find out how much the number of active throughput through the firewall ? i want to see how much the current firewall performance.

Message Edited by NDCool on 08-31-2009 09:48 PM
Regards,

ND
Juniper Employee
Posts: 22
Registered: ‎05-09-2008
0 Kudos

Re: Monitoring active firewall performace (throughput)

Hi,

 

You can do it two ways. Either via SNMP or you can collect few times outputs of "get clock" and "get counter stat" and count the throuput yourself based on in and out bytes.

 

regards,

/m

Contributor
Posts: 243
Registered: ‎11-26-2007
0 Kudos

Re: Monitoring active firewall performace (throughput)

Hi Mr. M,

 

Ehm ok...so we must calculate manual for it..

 

Regards,

ND
Highlighted
Juniper Employee
Posts: 22
Registered: ‎05-09-2008
0 Kudos

Re: Monitoring active firewall performace (throughput)

SNMP is easier and much more accurate, but if you can't do that then manual way is possible. Firewall can calculate packets per seconds, but not bandwidth unfortunately.

 

/m