Screen OS

Hi All,

I've seemed to have lost the ability to configure BGP, or OSPF either by GUI or cli after updateing the firmware. The only option I have is RIP. I'm running ScreenOS 5.4.0r28a.0. Does anyone know why or how to get it back?

What license do you have on the device?

License Details:

Model:              Baseline
Sessions:           64064 sessions
Capacity:           unlimited number of users
NSRP:               ActivePassive
VPN tunnels:        500 tunnels
Vsys:               None
Vrouters:           3 virtual routers
Zones:              15 zones
VLANs:              0 vlans
Drp:                Disable
Deep Inspection:    Disable
Deep Inspection Database Expire Date: Disable
Signature pack:     N/A
IDP:                Disable
AV:                 Disable(0)
Anti-Spam:          Disable(0)
Url Filtering:      Disable

You need an advanced model to do OSPF/BGP.

Baseline Models: The Baseline software license provides an entry-level solution for customer environments where features such as Deep Inspection™, OSPF and BGP dynamic routing, advanced High Availabilty, and full capacity are not critical requirements.

                                NetScreen-204 Baseline             NetScreen-208 Baseline
Sessions                                         64,000                        64,000
Concurrent VPN tunnels                 500                             500
Deep Inspection Firewall                N/A                             N/A
VLANs                                            0*                                 0*
OSPF/BGP                                    N/A                             N/A
High Availability (HA)               Active/Passive                Active/Passive
NetScreen Security Manager             Supported                         Supported

After you mentioned license I started looking and you're right. I managed to retrieve the keys from Juniper but when I try to update it tells me some of the features are already enabled and to verify the keys. Must I delete the keys I already have? If so, how?

This worked on our production router. Many thanks.