09-28-2008 02:47 AM - edited 09-28-2008 03:46 AM
Please check : http://kb.juniper.net/KB6989
Device Type Max Service Groups/Multi-cell Policy (Combined Total)
it's said :
"If the max limit is reached, in the early releases of ScreenOS 5.0 an error similar to the following may be sent to the console screen:
- Failed command - set group service "_p68svc_" hidden "
Can somebody tell me what's the relationship with the Software version ? is it only Hardware related? or the error only appears in the early releases of v5.0 ?
Solved! Go to Solution.
09-29-2008 12:54 AM
The problem with the hidden groups was reported as a bug in the early versions of 5.0 so in later versions you should no longer see that error. This doesn't mean that the restrictions on the number of groups has been removed, this still applies (although the number of groups can change per software version).
09-29-2008 01:22 PM
Thanks for your reply;
I think that since the limit has been reached, the appearance of this message is a normal behavior not a bug, isn't it ?
another question, Do you think that an upgrade of an NS208 ,from v5.0.0r8 to a recent version (The recommanded one v5.4 for exemple) will somehow increase this number (64) ?
Thanks again &
09-30-2008 02:02 AM
Could be both, the mention of the hidden group isn't supposed to be there AFAIK.
The number of groups hasn't been changed in later software versions for this platform. If you are able I would look into the new software, 5.4 is certainly the recommended version for your platform and there are a large number of improvements in other areas.
09-30-2008 10:26 AM - edited 09-30-2008 10:27 AM
Thanks a lot for the reply !