ScreenOS Firewalls (NOT SRX)
Reply
Contributor
anawaz
Posts: 131
Registered: ‎01-12-2010
0

SSG-320M - How to clear interface counters

Hi folks,

 

noob me. how do i clear ethernet interface counters on ssg-320m platform please..

i'm using gui, but happy with cli also.

 

thanks

anawaz

Ajaz Nawaz
CCIE#15721, CCVP
JNCIA-FWV / JUNOS
Distinguished Expert
Screenie
Posts: 1,085
Registered: ‎01-10-2008
0

Re: SSG-320M - How to clear interface counters

"clear count stat" in cli......

best regards,

Screenie.
Juniper Ambassador,
JNCIA IDP AC WX JNCIS FW SSL JNCIP SEC ENT SP JNCI

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
Contributor
anawaz
Posts: 131
Registered: ‎01-12-2010
0

Re: SSG-320M - How to clear interface counters

yo Screenie,

 

thank command is unavailable in the version i'm workin on...

 

Software Version: 6.1.0r6.0, Type: Firewall+VPN

Ajaz Nawaz
CCIE#15721, CCVP
JNCIA-FWV / JUNOS
Visitor
juniper_fan
Posts: 5
Registered: ‎12-01-2009
0

Re: SSG-320M - How to clear interface counters

SSG320>Clear counter ?
all                  clear all interface counters and flow counters
flow                 clear flow counters
ha                   clear ha counters
interface            clear interface counters
screen               clear screen counters

SSG320>

 

 

Regards,

A. Abdeen

Contributor
anawaz
Posts: 131
Registered: ‎01-12-2010
0

Re: SSG-320M - How to clear interface counters

Abdeen

 

Thanks for that. This command doesn't however let you clear the counter for a selected interface.

 

From the gui it's not possible period isn't it?

 

regards

anawaz

Ajaz Nawaz
CCIE#15721, CCVP
JNCIA-FWV / JUNOS
Visitor
juniper_fan
Posts: 5
Registered: ‎12-01-2009
0

Re: SSG-320M - How to clear interface counters

Hi Anawaz,

 

Unfortunately, you can't clear the counter from the GUI interface. But it is strange that your perform this command to the interface and it still not cleared.

Please try as the  following example:

1- get counter stat int e0/0

2- clear counter interface

3- get counter stat int e0/0      

 

you should find the interface counters is clear comparing to the output from the first command.

 

I hope that this can help you.

Please tag this reply as Accepted solution if it is.

 

Thanks

A. Abdeen

Contributor
anawaz
Posts: 131
Registered: ‎01-12-2010
0

Re: SSG-320M - How to clear interface counters

Abdeen - that still doesn't allow one to clear counters for a specific interface. My thinking is that this will require an enchancement in the code. I know for a fact this feature is standard in Cisco routers and switches :-(

Ajaz Nawaz
CCIE#15721, CCVP
JNCIA-FWV / JUNOS
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.