ScreenOS Firewalls (NOT SRX)
Reply
Visitor
Wotcha
Posts: 7
Registered: ‎06-14-2011
0

SSG 350M - Redundant link config in NSRP cluster ?

I have a pair of 350Ms running 6.2.0r6.0 currently configured as an NSRP pair (Active/Standby) but with single interfaces being monitored eth0/0 and eth1/1.

 

I am trying to figure out the best method to convert both units to redundant interfaces with minimal disruption and downtime. Can anyone suggest a how best to do this ?


I need to end up with:

red1 with members eth0/0 and eth 1/0

red2 with members eth0/1 and eth 1/1

NSRP then monitoring red1 and red2

 

I guess my main concern is that NSRP may get in a flap if I do them one box at a time, or do I need to do both at the same time ?

 

Visitor
gavin.zhang@jrunion.com.cn
Posts: 1
Registered: ‎04-26-2013
0

Re: SSG 350M - Redundant link config in NSRP cluster ?

How many redundant interface support

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.