SSG 5 & DSL modem compatibility for site-to-site VPN

[ycarus]

I have a SSG 5 & want to connect it on a DSL connection via PPoE settings. What's the compatible modem for this set-up?.By doing this, can i have the Dynamic Public IP on the untrust interface itself? I'm planning to put up a site-to-site VPN using a dynamic peer at one end and a static peer at the other end.

Anyone can help me?

Thanks in advance.

[mehdi]

hi

Refere to http://www.juniper.net/techpubs/software/screenos/screenos5.4.0/CE_v12.pdf

http://www.juniper.net/techpubs/software/screenos/screenos6.1.0/ce_v12.pdf

http://www.juniper.net/products/jseries/dsheet/100133.pdf

http://www.juniper.net/techpubs/software/screenos/screenos5x/screenos5xadsl/RG_ADSL.pdf

Kind regard 

[ycarus]

Thanks for the information.  But I have SSG-5 w/v.92, so i need a separate modem and i'm looking for the model of the modem that comes compatible with this SSG- 5.

It says in the datasheet for this unit, you can connect a modem via the V.92 interface.

I want to have the dynamic Public IP via the DSL connection from the ISP on the untrust port of the SSG-5.

Did you face this kind of set-up before? 

I'm asking this because of the Dynamic & Static peering of site-to-site VPN since the small branch office has a DSL connection and they acquire the public ip address dynamically.

[mehdi]

Hi

even you have  dynamic public ip you can build VPN connection between both site 

Regard 

[ycarus]

Thanks for the info. but I've learned that SSG-5 v.92 can't work on DSL lines even if you put a modem to it. It will only work on dial-up connections like 56K dial-up.

[NDCool]

Hi, You can do with any dsl modem that have bridge mode feature. Just setup dsl modem on bridge mode, then plug cable from untrust to eth port on dsl modem, set untrust port PPOE mode and setup dsl user/password. I have work alot with this, many my customers used their ssg work with dsl modem.