ScreenOS Firewalls (NOT SRX)
Reply
Contributor
jayNEC
Posts: 42
Registered: ‎01-24-2009
0

SSG 5 ten user

I see the part number SSG-5-SB-10U available, but no info on it from Juniper.  What does the 10 user refer to?  10 VPN's or 10 clients behind the firewall/router?
Trusted Expert Trusted Expert
Trusted Expert
WL
Posts: 789
Registered: ‎07-26-2008
0

Re: SSG 5 ten user

It actually means 10 users behind the firewall. see the following exerpt I took from the old NS5GT datasheet:

 

License Options: The NetScreen-5GT is available in three models to support different umbers of users.
10 User Product License: The 10 user product license (NetScreen-5GT 10-User) support 10 users.

 

To my knowledge the SSG5 didnt have this restriction even on the 5.4 screenOS. Only the old NS5GTs and such had some restrictions. Do you have a special beta box or smthing?

****pls click the button " Accept as Solution" if my post helped to solve your problem****
Contributor
jayNEC
Posts: 42
Registered: ‎01-24-2009
0

Re: SSG 5 ten user

[ Edited ]
No, I don't have one - I see that part number available from my distributor.  And, it's cheap.
Message Edited by jayNEC on 05-13-2009 12:02 PM
Distinguished Expert
Screenie
Posts: 1,076
Registered: ‎01-10-2008
0

Re: SSG 5 ten user

Ask them if it's realy a SSG5, most probably it's a 5GT!!!

best regards,

Screenie.
Juniper Ambassador,
JNCIA IDP AC WX JNCIS FW SSL JNCIP SEC ENT SP JNCI

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.