The SSG320 runs the same PIM cards that the SSG550 does. I have these dual T1 cards on my SSG550, and run an MLPPP bundle across 3 PIMS ( 6 T1s).
Here is my Multilink interface for my MLPPP bundle and the members on an SSG550.
testfw01-> get int ml1
Interface ml1:
description ml1
number 35, if_info 84280, if_index 0, encap mlppp, mode route
link up, link protocol up, phy-link up/half-duplex
Multilink port has 6 members: serial2/0; serial2/1; serial1/0; serial1/1; serial4/0; serial4/1;
Here is the chassis info, slot 1, 2 and 4 have the dual T1 cards in them.
testfw01-> get chassis
Chassis Environment:
Power Supply: Good
CPU Temperature: 116'F ( 47'C)
System Temperature: 80'F ( 27'C)
Alarm Control Information:
Power failure audible alarm: disabled
Fan failure audible alarm: disabled
Temperature audible alarm: disabled
CPU alarm temperature is 194'F (90'C)
System alarm temperature is 113'F (45'C)
Slot Information:
Slot Status Asm-id Serial Number Version
0 Online 01bf XXXXX REV 00
1 Online 0708 AI0503XXX REV 04
2 Online 0708 AI0503XXX REV 04
3 Online 0711 S/N NBXXX REV 06
4 Online 0708 AI0503XX REV 04
5 Empty
6 Empty
Message Edited by shadow on 06-11-2009 04:01 PM
Message Edited by shadow on 06-11-2009 04:02 PM
Message Edited by shadow on 06-11-2009 04:05 PM
Message Edited by shadow on 06-11-2009 04:06 PM
Message Edited by shadow on 06-11-2009 04:06 PM