ScreenOS Firewalls (NOT SRX)
Reply
New User
eparker
Posts: 1
Registered: ‎05-06-2010
0

SSG5 ALG monitoring via SNMP

I'm trying to monitor this command specifically on the SSG5:

 

get alg sip calls
   Total number of calls = 0 (# of call legs 0)
-----------------------------

Is there a MIB that I can use to monitor this via SNMP? I'm looking for something that would tell me current/max.  So if there are 16 current calls and 64 is the max I need 16/64 returned.  Even if it takes 2 different commands to get the information.  I can't seem to find it and it would be very useful for us.  Thanks in advance!

 

-----

Eric Parker

Distinguished Expert
spuluka
Posts: 2,596
Registered: ‎03-30-2009
0

Re: SSG5 ALG monitoring via SNMP

The mibs can be downloaded from the software download area.

 

MIB Downloads

 

However, In a quick look through here I don't see the sip parameters listed.  Maybe if you import these into your management system you'll find something.

Steve Puluka BSEET
Juniper Ambassador
Senior Network Engineer - UPMC Pittsburgh, PA
JNCIA-ER JNCIA-EX JNCIS-SEC JNCIP-SEC
JNCIS-FWV JNCIS-SSL
MCP - Managing Server 2003 MCP - Windows XP Professional
MCTS Windows 7
http://puluka.com/home
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.