Screen OS

last person joined: 8 months ago 

This is a legacy community with limited Juniper monitoring.

  • 1.  SSG5 Can't Get To Login Screen Using HTTP Redirect

    Posted 11-20-2011 16:36

    I have no problem getting in using HTTP.  When I set HTTP Redirect I can't get to the login screen.  I'm using Netscreen OS 6.3.0r6.0 I then have to login via telnet and unset admin http redirect.  I'm attempting to use the Default - System Self Signed Cert

     

    I have the webui port set to 8081 and the HTTPS port set to 443 and the management ip is set to 10.10.10.1

     

    I go to http://10.10.10.1:8081 and it does try to redirect because the addess line ends up https://10.10.10.1 but fails to launch the sign page

     

    Any help would be appreciated.

     

    Thanks!!!

    Eddie Freeman



  • 2.  RE: SSG5 Can't Get To Login Screen Using HTTP Redirect

    Posted 11-20-2011 23:49

    Hi,

     

    Use  https://10.10.10.1 (without /index.html) to access the login screen. The redirect may really sometimes fail. This has something to do with  page reloading/refreshing/cookies in IE. 



  • 3.  RE: SSG5 Can't Get To Login Screen Using HTTP Redirect
    Best Answer

    Posted 11-25-2011 19:45

    Thanks for the reply.  My problem was that the interface did not have the SSL switch set in the management section.  It's working now.

     



  • 4.  RE: SSG5 Can't Get To Login Screen Using HTTP Redirect

    Posted 04-16-2013 02:28

    Hello!

    I have the same problem but I can't login with http and https. I try to connect to telnet and I enter the login and password but Login failed.

    I tried too to conenct via AUX port but I have the same problem. Login Failed.

     

    Have I any option to uncheck redirect HTTP to HTTPS, from console o other acces?

    The firmware version of my SSG5 is SSG5 6.3.0r13

     

    Thanks !



  • 5.  RE: SSG5 Can't Get To Login Screen Using HTTP Redirect

    Posted 04-16-2013 06:01

    Hi,

     

    The command is unset admin http redirect

     

    Use get socket to check if the firewall is really listening at the default http/https ports. Perhaps they have been changed.



  • 6.  RE: SSG5 Can't Get To Login Screen Using HTTP Redirect

    Posted 04-17-2013 06:10

    Thanks for the command echidov, but I can't access to SSG5 using telnet and aux port via putty, hyperterminal,...

    I think that in my SSG5 is disabled to manage via telnet or others.

    I try other users and any can access :(((((((

     

    There are any other solution?

     

     



  • 7.  RE: SSG5 Can't Get To Login Screen Using HTTP Redirect

    Posted 04-18-2013 05:14

    Hi,

     

    You should use the console port (not aux). The parity and flow control should be disabled in the terminal application.

     



  • 8.  RE: SSG5 Can't Get To Login Screen Using HTTP Redirect

    Posted 04-18-2013 05:51

    I tryed in both ports, AUX and CONSOLE and I have the same error.

    Finally I will restart the configuration... 😞

     

    Thanks a lot!!!



  • 9.  RE: SSG5 Can't Get To Login Screen Using HTTP Redirect

    Posted 10-20-2014 21:20

    Hi, Could you give me the steps to get back the "ssl" enable ?

    I am very new on telnet connection.

     

    Thanks!