ScreenOS Firewalls (NOT SRX)
Reply
Visitor
atraper
Posts: 2
Registered: ‎04-29-2012
0
Accepted Solution

Secondary HA path vs NSRP interface

Hello All,

I have ss140 Active/Backup cluster with one dedicated HA link managed from NSM. I have configured secondary HA link using L3 interface. Everything is fine but in NSM there are two options in nsrp configuration window: Secondary HA path and NSRP interface. Anyone knows what’s the difference between them and what is NSRP interface.

Regards
atraper

Distinguished Expert
echidov
Posts: 858
Registered: ‎11-02-2009
0

Re: Secondary HA path vs NSRP interface

Hi,

 

This is for very old ScreenOS releases and smaller firewalls that did not support a HA zone. A pair of data interfaces could be used for the NSRP traffic. I am not sure this would work with the modern releases.

Simply ignore these settings.

Kind regards,
Edouard
Visitor
atraper
Posts: 2
Registered: ‎04-29-2012
0

Re: Secondary HA path vs NSRP interface

Thanks Edouard!

 

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.