ScreenOS Firewalls (NOT SRX)
Reply
Contributor
ye_line
Posts: 26
Registered: ‎04-22-2010
0

The hidden command

Dear All:

 

1. There is one command :  set group address hidden.  may query what is the hidden command for? if the configuraiton is right, can it shown in the config file?

 

2. in the Envar Variable, the nsrp-max-cluster=16, however, even the envar is setup , the max cluster is still 7 (5.4.r16. 0+ns25) , may advise the reason why the envar is failure?

 

Thanks for any feedback.

 

Bin

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.