ScreenOS Firewalls (NOT SRX)
Reply
Contributor
7wonders
Posts: 33
Registered: ‎07-08-2008
0
Accepted Solution

firewall authentication "client-name-filter" configuration

i am using Junos-ES 9.0, can some one help in configuring "client-name-filter" with detail example, i tried configuring but somehow unable to authenticate so far.

 

-Ray 

Trusted Expert
AndyC
Posts: 441
Registered: ‎07-08-2008
0

Re: firewall authentication "client-name-filter" configuration

Can you post the config you have so far.

 

Regards

 

Andy

JNCIS-FWV
JNCIA-WX
JNCIA-SSL
JNCIA-ER
Contributor
7wonders
Posts: 33
Registered: ‎07-08-2008
0

Re: firewall authentication "client-name-filter" configuration

[ Edited ]

configuration is like this... not sure if this is correct

 

user: kevin

 

so if user "kevin" has to authenticate, how it will enter username on authentication prompt

 

 

root@att-lab2# show access | match client-na | display set
set access profile HR client-name-filter domain-name jump.com
set access profile HR client-name-filter separator >
set access profile HR client-name-filter count 1
[edit]
root@att-lab2#

Message Edited by 7wonders on 09-04-2008 02:04 PM
Contributor
7wonders
Posts: 33
Registered: ‎07-08-2008
0

Re: firewall authentication "client-name-filter" configuration

still struggling... if possible please point out some online docs.

 

-Ray

Distinguished Expert
Raheel
Posts: 414
Registered: ‎06-18-2008

Re: firewall authentication "client-name-filter" configuration

configuration looks ok, when you get prompt for fwauth username, please enter username: kevin>jump.com and password.

 

it shoud work.

 

also check 

http://www.juniper.net/techpubs/software/junos-es/junos-es90/index.html

 

"Security Configuration Guide"

 

thanks

Raheel Anwar

 

Follow me on Twitter @anwar_raheel

--
If this post was helpful, please mark this post as an "Accepted Solution".
Kudos are always appreciated!
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.