hi all,
i try to configure nsrp between two SSG 550M.
But a see tha the ha link in secondary path not available
this is the output of get nsrp
cluster1:ZONE-2-FW1(M)-> get nsrp
nsrp version: 2.0
cluster info:
cluster id: 1, name: cluster1
local unit id: 1896064
active units discovered:
index: 0, unit id: 1896064, ctrl mac: 0021591cee8e, data mac: 0021591cee95
index: 1, unit id: 9132800, ctrl mac: 001db58b5b0e, data mac: 001db58b5b15
total number of units: 2
VSD group info:
init hold time: 8
heartbeat lost threshold: 3
heartbeat interval: 1000(ms)
master always exist: disabled
group priority preempt holddown inelig master PB other members
1 50 yes 10 no myself 9132800
2 100 yes 3 no 9132800 myself
total number of vsd groups: 2
Total iteration=459,time=13324580,max=161517,min=22338,average=29029
RTO mirror info:
run time object sync: enabled
route synchronization: disabled
ping session sync: enabled
coldstart sync done
nsrp data packet forwarding is enabled
nsrp link info:
control channel: ethernet4/0 (ifnum: 14) mac: 0021591cee8e state: up
data channel: ethernet1/0 (ifnum: 21) mac: 0021591cee95 state: up
ha secondary path link not available
NSRP encryption: disabled
NSRP authentication: disabled
device based nsrp monitoring threshold: 255, weighted sum: 0, not failed
device based nsrp monitor interface:
device based nsrp monitor zone:
device based nsrp track ip: (weight: 255, disabled)
number of gratuitous arps: 5
config sync: enabled
track ip: disabled
cluster1:ZONE-2-FW1(M)->
Message Edited by Abdallah on 10-16-2009 06:44 AM