Screen OS

Hi everyone, I have a juniper ssg5 and I'm try to learning some of this and i have two problems with this.

My first problem is this:

bgroup0 has a static IP and my modem has a DHCP active.

The pool ips from modem is  192.168.10.100- 192.168.10.200

And the second is about the bandiwith limit in bgroup0, it was working but I changed the limit with a high number then when I went to change the limit didn't work . I reset the firewall and  I configured the firewall by CLI, but  it doesn't work.

If you can give me at least orientation, I'd appreciate.

The default configuration on the SSG5 expects eth0/0 to be connected to the upstream internet.  If you use this interface on a default configuration you will get both DHCP on the interface and internet NAT automatically working from the trust zone to this untrust zone.

If you want to change this to eth0/1 inside of bgroup0 as you have it indicated.  Edit the bgropup0

change the zone to untrust

change the ip address to dhcp

On the bandwidth per interface, I cannot read the screen shot.  But it appears you are trying to give the interface more than the physical port has.  Remember these numbers are in kb and the physical interface on an SSG5 is only fast ethernet 100 mbps.

Thanks for your reply, it worked.

It was so easy, I really need to read more.