ScreenOS Firewalls (NOT SRX)
Reply
Juniper Employee
funoove
Posts: 9
Registered: ‎06-25-2008
0
Accepted Solution

radius accounting

does SSG support radius accounting to collect amount of data recieved/transferred per user?
Distinguished Expert
Raheel
Posts: 414
Registered: ‎06-18-2008
0

Re: radius accounting

i believe you are running screenos, please specify version?

 

thanks

Raheel 

Follow me on Twitter @anwar_raheel

--
If this post was helpful, please mark this post as an "Accepted Solution".
Kudos are always appreciated!
Juniper Employee
funoove
Posts: 9
Registered: ‎06-25-2008
0

Re: radius accounting

thanks for a quick response, 6.0 or above?

Distinguished Expert
Raheel
Posts: 414
Registered: ‎06-18-2008
0

Re: radius accounting

auth-radius accounting is not supported i believe in 6.0 release, it based on src-ip address of an authenticated user for a certain period of time. But if this user is behind a PAT router then all other users behind this PAT router have access if one user authenticated. Furthermore there is no track data being transmitted on a policy unless the COUNT knob was set. There is a limited amount of rules which can count and then data is only counted for all sessions and users permitted by this rule.

 

i hope this will answer of your question.

 

Follow me on Twitter @anwar_raheel

--
If this post was helpful, please mark this post as an "Accepted Solution".
Kudos are always appreciated!
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.