ScreenOS Firewalls (NOT SRX)
Reply
Visitor
Oncio
Posts: 6
Registered: ‎09-18-2008
0

starting with SSG5

Hi everyone.

I am starting witch SSG5 configuration and i need help. I haven`t got experience with SSG5 so please help me.

I have subnet 192.168.4.x and ip 83.x.x.x (interent connection) and wlan 192.168.5.x. I dont know how to cofigure SSG5 to connect 192.168.4.x with 83.x.x.x and how to connect 192.168.5.x with 83.x.x.x. I have dhcp server in 192.168.4.x subnet.

I want to configure dhcp server in 192.168.5.x

I want to separate 192.168.4.x and 192.168.5.x 

 

Please help me.

 

Regards

 

Contributor
JorisK
Posts: 30
Registered: ‎09-16-2008
0

Re: starting with SSG5

Hi Oncio,

 

Please provide some more information. Do you have a new unconfigured SSG5 or is it already (mis)configured?

Visitor
Oncio
Posts: 6
Registered: ‎09-18-2008
0

Re: starting with SSG5

Hi JorisK,

I have got new unconfigured SSG5 and I don`t know how to configure it. 

 

lan 192.168.4.0/24 (dhcp server 192.168.4.1 not ssg5)                                            ssg5 (internet connection 

                                                                                                                                          ip 83.x.x.2,                                                                                                                                                           gateway 83.x.x.1 )

 

wlan(on ssg5) 192.168.5.0/24(dhcp server and I would like to have ssg5 as dhcp server)    

 

I need to separarate lan and wlan and I need connect lan and wlan with untrast interenet connection.

Contributor
JorisK
Posts: 30
Registered: ‎09-16-2008
0

Re: starting with SSG5

Connect your internetconnection to port 0/0, connect a notebook or computer to port 0/3. Power up the Netscreen and wait until the statusled start blinking, this means the device is ready.

 

Now renew your IP settings using DHCP and connect to 192.168.1.1, this will get you on the Rapid Deployment guide. Here you'll find a wizard that will let set the IP configuration and some DHCP options.

 

Visitor
Oncio
Posts: 6
Registered: ‎09-18-2008
0

Re: starting with SSG5

What about connection between zones? How to configure connections and polices?
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.