ScreenOS Firewalls (NOT SRX)
Reply
Contributor
futuretec
Posts: 95
Registered: ‎12-10-2008
0

two l2tp tunnel with same peer id

hi,

 

is it possible to create two l2tp tunnel and both having same peer id eg. 0.0.0.0 .

because all the external users are connecting from diffrent locations i cant stick to single address.

 

i`ll be thankfull for any idea over here .

Super Contributor
Moerkholt
Posts: 169
Registered: ‎11-05-2007
0

Re: two l2tp tunnel with same peer id

Hi

 

Hope the attached Application Note can give you some help.

 

Regards

Hans
JNCIS-FWV

If this worked for you then please flag my post as an "Accepted Solution" so others can benefit from it. A kudo would be nice if you think I earned it
Contributor
futuretec
Posts: 95
Registered: ‎12-10-2008
0

Re: two l2tp tunnel with same peer id

i already followed the doument for creating a tunnel but my point is i need to create another tunnel to a diffrent destination.

 

 

eg...

 

tunnel1 = peer id 0.0.0.0 destination 1.1.1.1

tunnel2= peer id 0.0.0.0 destination 2.2.2.2

Super Contributor
Moerkholt
Posts: 169
Registered: ‎11-05-2007
0

Re: two l2tp tunnel with same peer id

Hi

 

I am not quite sure I know what you mean.

 

The L2TP protocol is by nature dynamic, where the only static element is the ip-address of the firewall the user connect to.

 

The users can move around on diffrent locations.

Regards

Hans
JNCIS-FWV

If this worked for you then please flag my post as an "Accepted Solution" so others can benefit from it. A kudo would be nice if you think I earned it
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.