Training, Certification, and Career Topics
Reply
Trusted Contributor
JunosChris
Posts: 142
Registered: ‎10-02-2010
0
Accepted Solution

JNCIE-ENT Blueprint clarification

On the JNCIE-ENT blueprint, under "Interfaces" there is a bullet point "load-balancing".

 

Is this per-packet load balancing:

[edit]
policy-options {
    policy-statement load-balancing-policy {
        then {
            load-balance per-packet;
        }
    }
}
routing-options {
    forwarding-table {
        export load-balancing-policy;
    }
}

Or is this something else? Because the "load-balance per-packet" is DEFINITELY the "load-balancing" under the Protocol Independant Routing section. Is this listed twice?

 

Or is this load balancing for LAG interfaces?

--
Chris Jones
Juniper Ambassador
JNCIE-ENT #272
JNCIP-SP
CCIE #25655
Recognized Expert
JNPRdhanks
Posts: 302
Registered: ‎11-01-2010
0

Re: JNCIE-ENT Blueprint clarification

[ Edited ]

Removed my technical resonse, since this was a blueprint clarification question.

Doug Hanks
JNCIE-ENT #213, JNCIE-SP #875

Follow me on Twitter @douglashanksjr
Recognized Expert
JCert
Posts: 342
Registered: ‎01-15-2010
0

Re: JNCIE-ENT Blueprint clarification

Hi Freely,

 

Doug is going down the right path here, you will want to know how to implement load balancing in every place where it's relevant to do so, either as a function of default behavoir or by configuration.

 

To help be a bit more clear in the blueprint, we will reduce to just one mention of 'load-balancing'.

 

Regards,

Kieran Milne

Tech Lead, JNCP

Trusted Contributor
JunosChris
Posts: 142
Registered: ‎10-02-2010
0

Re: JNCIE-ENT Blueprint clarification

I'm well aware of exactly what he's talking about, but it still doesn't address why it's mentioned twice in the blueprint... wasn't sure if I was missing something. 

--
Chris Jones
Juniper Ambassador
JNCIE-ENT #272
JNCIP-SP
CCIE #25655
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.