07-02-2012 06:43 AM
does anyone have experience with port-groups on the WLC880R?
Are there any interoperability guides?
My problem is the following:
I want a link aggregation to an AVAYA ERS Switch (with LACP) but in the guides there is only an example with Cisco EtherChannel!
Every hint is appreciated!
Solved! Go to Solution.
07-02-2012 07:12 AM
based on configuration guide (not tested), WLC supports only static link aggregation, no LACP/PAgP.
It should work with static LAG on Avaya.
Load sharing is based on flow src/dst MAC address.