Good day all, I am very new to this communtiy and am really hoping to get some help with the problem I am facing in load balancing our ISP outgoing traffic. We have an M10i with 4 equal cost STM-...
Hi to everyone. I have next situation. I set export policy for bgp session as: set protocols bgp group EDGE type internal set protocols bgp group EDGE local-address x.x.x.x set protocols bgp group ED...
Hi all, I have redistributed static route to OSPF with this commands: set policy-options policy-statement ospf-default term 1 from route-filter 0.0.0.0/0 exact accept set protocols ospf export os...
We have a number of J6350 routers deployed. On some of them, IPsec tunnels are configured under the [edit security] hierarchy using st0 interfaces, which are using the "bind-interface" sta...
I have a MX480 with MX-DPC doing CGNAT. I'm Planning to use next-hop style service set. Sub facing Interface: GE1/0/0 Core facing interface: GE 2/0/0 inside-service-interface :sp-4/0/0.10 inside-...
Hi, For an MPC-3D-16XGE-SFPP installed on an MX960 with SCBE-MX-S it seems we can't use all the 16 ports i.e. we will lose redundancy and/or failover or have problems with these. I heard there is/...
Hello all, I have set up a lab to learn more about RSVP with regards to a topology like below: Client_1 <-> CE-R1 <-> PE-R1 <-> MPLS CORE <-> PE-R2 <-> CE-R2 <-&g...
Hi All, When we display the LSDB using "show ospf database" command its listing the options field. I am aware what info is carried in options filed. But not able to relate it with the L...
I found fast-reroute optimize-timer in the mpls configuration guide, but I'm not really understanding the purpose of this. https://www.juniper.net/techpubs/en_US/junos10.4/information-products/topic-...
