U-Boot 1.1.6-JNPR-2.1 (Build time: Jul 4 2011 - 03:55:46) SRX_240_POE board revision major:0, minor:31, serial #: AAAG6893 OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate) DRAM: 1024 MB Starting Memory POST... Checking datalines... OK Checking address lines... OK Checking 512K memory for U-Boot... OK. Running U-Boot CRC Test... OK. Flash: 4 MB USB: scanning bus for devices... Root Hub 0: 3 USB Device(s) found Root Hub 1: 1 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Clearing DRAM........ done BIST check passed. 1:00:00.0 Vendor/Device ID = 0x811210b5 1:01:07.0 Vendor/Device ID = 0xc72414e4 Un-Protected 1 sectors writing to flash... Protected 1 sectors Boot Media: nand-flash usb Net: octeth0 POST Passed Press SPACE to abort autoboot in 1 seconds => setenv oct.net.init => saveenv Saving Environment to Flash... Un-Protected 1 sectors Erasing Flash... . done Erased 1 sectors Writing to Flash... writing to flash... done Protected 1 sectors => reset U-Boot 1.1.6-JNPR-2.1 (Build time: Jul 4 2011 - 03:55:46) SRX_240_POE board revision major:0, minor:31, serial #: AAAG6893 OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate) DRAM: 1024 MB Starting Memory POST... Checking datalines... OK Checking address lines... OK Checking 512K memory for U-Boot... OK. Running U-Boot CRC Test... OK. Flash: 4 MB USB: scanning bus for devices... Root Hub 0: 3 USB Device(s) found Root Hub 1: 1 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Clearing DRAM........ done BIST check passed. 1:00:00.0 Vendor/Device ID = 0x811210b5 1:01:07.0 Vendor/Device ID = 0xc72414e4 Boot Media: nand-flash usb Net: octeth0 POST Passed Press SPACE to abort autoboot in 1 seconds ELF file is 32 bit Loading .text @ 0x8f000078 (245596 bytes) Loading .rodata @ 0x8f03bfd4 (13940 bytes) Loading .rodata.str1.4 @ 0x8f03f648 (16648 bytes) Loading set_Xcommand_set @ 0x8f043750 (100 bytes) Loading .rodata.cst4 @ 0x8f0437b4 (20 bytes) Loading .data @ 0x8f044000 (5608 bytes) Loading .data.rel.ro @ 0x8f0455e8 (120 bytes) Loading .data.rel @ 0x8f045660 (136 bytes) Clearing .bss @ 0x8f0456e8 (11656 bytes) ## Starting application at 0x8f000078 ... Consoles: U-Boot console Found compatible API, ver. 2.1 FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.1 (builder@chamuth.juniper.net, Mon Jul 4 03:14:10 UTC 2011) Memory: 1024MB [1]Booting from nand-flash slice 1 Un-Protected 1 sectors writing to flash... Protected 1 sectors Loading /boot/defaults/loader.conf /kernel data=0x9ecbac+0xd8890 syms=[0x4+0x7dca0+0x4+0xb3e02] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0x801000d8 ... getbootinfo: magic 0x0 md 0x80cf8000 memsize 0x4 WARNING: Incompatible U-Boot version2.1 You need to upgrade to 1.5 or above WARNING: Incompatible loader version2.1 You need to upgrade to 1.5 or above getbootinfo: boothowto 0x1000 kernend 0x80d00000 memsize 1024MB kernelname /kernel Platform Starting init regular console Initializing octeon watchdog GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb getmemsize: msgbufp[size=32768] = 0x8000cfe4 Copyright (c) 1996-2011, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 10.4R3.4 #0: 2011-03-19 22:29:40 UTC builder@warth.juniper.net:/volume/build/junos/10.4/release/10.4R3.4/obj-octeon/bsd/sys/compile/JSRXNLE JUNOS 10.4R3.4 #0: 2011-03-19 22:29:40 UTC builder@warth.juniper.net:/volume/build/junos/10.4/release/10.4R3.4/obj-octeon/bsd/sys/compile/JSRXNLE real memory = 1073741824 (1024MB) avail memory = 527048704 (502MB) cpuid: 0, btlb_cpumap:0xffffffff FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Initializing watchdog interupt Loading RT Fifo module..... Loaded RT Fifo module pmap_helper loaded (interface version 6, syscall 210) cpu0 on motherboard : CAVIUM's Octeon CPU Rev. 0.8 with no FPU implemented L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way. L2 Cache: Size 128kb, ? way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 dwc0: on obio0 usb0: DWC OTG Controller Using DMA mode Init: Port Power? op_state=1 Init: Power Port (0) usb0: on dwc0 usb0: USB revision 2.0 uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2 uhub1: single transaction translator uhub1: 3 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3 dwc1: on obio0 usb1: DWC OTG Controller Using DMA mode Init: Port Power? op_state=1 Init: Power Port (0) usb1: on dwc1 usb1: USB revision 2.0 uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 1 port with 1 removable, self powered pcib1: on obio0 Disabling Octeon big bar support PCIe: Waiting for port 0 to finish reset PCIe: Port 0 link active, 2 lanes PCIe: Waiting for port 1 to finish reset PCIe: Port 1 link active, 1 lanes pcib1: Initialized controller pci0: on pcib1 pcib2: irq 0 at device 0.0 on pci0 pci1: on pcib2 pci1: at device 2.0 (no driver attached) pci1: at device 7.0 (no driver attached) pcib0: on obio0 pci2: on pcib0 pci2: at device 0.0 (no driver attached) cpld0 on obio0 gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 platform_cookie_read not implemented Timecounter "mips" frequency 600000000 Hz quality 0 Timecounters tick every 1.000 msec Loading the NETPFE ethernet module Loading E1/T1/J1 driver Loading the DS1/E1 Media Layer; Attaching to media services layer Loading common multilink module. Loading the NETPFE PPPoE module Loading the netpfe services driver Loading the NETPFE docsis module Loading DS0 driver Loading the DS0 Media Layer; Attaching to media services layer Loading the XDSL Media Layer; Attaching to media services layer Loading the IPSec driver Loading the PTM driver Loading the ISDN driver Loading the ISDN BRI Media Layer; Attaching to media services layer Loading Link Services PICs module. IPsec: Initialized Security Association Processing. da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Trying to create bootdev, rootpartition da0s1a Trying to mount root from ufs:/dev/da0s1a WARNING: / was not properly dismounted Interrupt storm detected on "swi0:"; throttling interrupt source Ignoring watchdog timeout during boot/reboot Attaching /cf/packages/junos via /dev/mdctl... Mounted junos package on /dev/md0... Ignoring watchdog timeout during boot/reboot Ignoring watchdog timeout during boot/reboot Media check on da0 Ignoring watchdog timeout during boot/reboot Ignoring watchdog timeout during boot/reboot Ignoring watchdog timeout during boot/reboot Ignoring watchdog timeout during boot/reboot Ignoring watchdog timeout during boot/reboot panic: Hardware watchdog timeout NMI cpuid = 0 KDB: stack backtrace: SP 0x0: not in kernel uart_z8530_class+0x0 (0,0,0,0) ra 0 sz 0 pid 24, process: swi7: clock ###Entering boot mastership relinquish phase KDB: enter: panic [thread pid 24 tid 100023 ] Stopped at breakpoint+0x4: jr ra db>