juniper@R1> configure Entering configuration mode [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# set protocols ospf area 0 interface ge-0/0/0 [edit] juniper@R1# commit commit complete [edit] juniper@R1# exit Exiting configuration mode juniper@R1> show ospf neighbor juniper@R1> show ospf neighbor Address Interface State ID Pri Dead 12.1.1.2 ge-0/0/0.0 Full 12.1.1.2 128 38 juniper@R1> show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:10:11 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:10:11 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:12:36 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:12:39 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:03:05, metric 1 MultiRecv juniper@R1> show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 10.1.1.0/24 *[Direct/0] 00:00:20 > via ge-0/0/0.0 10.1.1.1/32 *[Local/0] 00:00:20 Local via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:15:11 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:15:11 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:17:36 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:17:39 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:08:05, metric 1 MultiRecv juniper@R1> clear ospf database juniper@R1> show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 10.1.1.0/24 *[Direct/0] 00:00:26 > via ge-0/0/0.0 10.1.1.1/32 *[Local/0] 00:00:26 Local via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:15:17 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:15:17 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:17:42 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:17:45 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:08:11, metric 1 MultiRecv juniper@R1> show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 10.1.1.0/24 *[Direct/0] 00:00:29 > via ge-0/0/0.0 10.1.1.1/32 *[Local/0] 00:00:29 Local via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:15:20 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:15:20 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:17:45 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:17:48 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:08:14, metric 1 MultiRecv juniper@R1> juniper@R1> juniper@R1> juniper@R1> juniper@R1> juniper@R1> juniper@R1> show route inet.0: 8 destinations, 8 routes (8 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[Direct/0] 00:00:42 > via lo0.0 10.1.1.0/24 *[Direct/0] 00:02:07 > via ge-0/0/0.0 10.1.1.1/32 *[Local/0] 00:02:07 Local via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:16:58 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:16:58 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:19:23 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:19:26 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:09:52, metric 1 MultiRecv juniper@R1> configure Entering configuration mode Users currently editing the configuration: juniper terminal p0 (pid 10759) on since 2011-06-02 23:34:07 UTC, idle 00:00:47 [edit] [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# show interfaces | display set set interfaces ge-0/0/0 unit 0 family inet address 12.1.1.1/24 set interfaces ge-0/0/0 unit 0 family inet address 10.1.1.1/24 set interfaces ge-0/0/3 unit 0 family inet address 192.168.128.144/24 set interfaces lo0 unit 0 family inet address 1.1.1.1/32 [edit] juniper@R1# delete interfaces lo0 [edit] juniper@R1# commit commit complete [edit] juniper@R1# [edit] juniper@R1# exit Exiting configuration mode juniper@R1> show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 10.1.1.0/24 *[Direct/0] 00:02:33 > via ge-0/0/0.0 10.1.1.1/32 *[Local/0] 00:02:33 Local via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:17:24 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:17:24 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:19:49 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:19:52 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:10:18, metric 1 MultiRecv juniper@R1> show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 10.1.1.0/24 *[Direct/0] 00:02:37 > via ge-0/0/0.0 10.1.1.1/32 *[Local/0] 00:02:37 Local via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:17:28 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:17:28 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:19:53 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:19:56 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:10:22, metric 1 MultiRecv juniper@R1> juniper@R1> juniper@R1> show ospf neighbor Address Interface State ID Pri Dead 12.1.1.2 ge-0/0/0.0 Full 10.1.1.2 128 35 10.1.1.2 ge-0/0/0.0 Full 10.1.1.2 128 36 juniper@R1> show ospfin ^ syntax error, expecting . juniper@R1> show ospf interface Interface State Area DR ID BDR ID Nbrs ge-0/0/0.0 BDR 0.0.0.0 10.1.1.2 10.1.1.1 1 ge-0/0/0.0 BDR 0.0.0.0 10.1.1.2 10.1.1.1 1 juniper@R1> configure Entering configuration mode Users currently editing the configuration: juniper terminal p0 (pid 10759) on since 2011-06-02 23:34:07 UTC, idle 00:02:00 [edit] [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# show interfaces | display set set interfaces ge-0/0/0 unit 0 family inet address 12.1.1.1/24 set interfaces ge-0/0/0 unit 0 family inet address 10.1.1.1/24 set interfaces ge-0/0/3 unit 0 family inet address 192.168.128.144/24 [edit] juniper@R1# exit Exiting configuration mode juniper@R1> configure Entering configuration mode Users currently editing the configuration: juniper terminal p0 (pid 10759) on since 2011-06-02 23:34:07 UTC, idle 00:02:09 [edit] [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# delete interfaces ge-0/0/0 unit 0 family inet address 10.1.1.1/24 [edit] juniper@R1# show interfaces \ d s ^ invalid interface type in '\ d'. juniper@R1# show interfaces \ d s error: invalid interface type in '\ d': \ d [edit] juniper@R1# show interfaces | display set set interfaces ge-0/0/0 unit 0 family inet address 12.1.1.1/24 set interfaces ge-0/0/3 unit 0 family inet address 192.168.128.144/24 [edit] juniper@R1# commit commit complete [edit] juniper@R1# [edit] juniper@R1# exit Exiting configuration mode juniper@R1> configure exclusive warning: uncommitted changes will be discarded on exit Entering configuration mode Users currently editing the configuration: juniper terminal p0 (pid 10759) on since 2011-06-02 23:34:07 UTC, idle 00:02:47 [edit] [edit] juniper@R1# [edit] juniper@R1# run show ospf neighbor Address Interface State ID Pri Dead 12.1.1.2 ge-0/0/0.0 Full 12.1.1.2 128 33 [edit] juniper@R1# runs ^ unknown command. juniper@R1# runsh ^ unknown command. juniper@R1# runshro ^ unknown command. juniper@R1# runshro ^ unknown command. [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:19:18 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:19:18 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:21:43 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:21:46 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:12:12, metric 1 MultiRecv [edit] juniper@R1# show | display set | match ospf set protocols ospf area 0.0.0.0 interface ge-0/0/0.0 [edit] juniper@R1# set protocols ospf area 0.0.0.0 interface ge-0/0/0.0 interface-type p2p [edit] juniper@R1# commit commit complete [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# run show ospf neighbor Address Interface State ID Pri Dead 12.1.1.2 ge-0/0/0.0 Full 12.1.1.2 128 34 [edit] juniper@R1# run clear ospf neighbor [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:20:25 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:20:25 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:22:50 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:22:53 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:13:19, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:21:05 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:21:05 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:23:30 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:23:33 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:13:59, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:21:07 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:21:07 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:23:32 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:23:35 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:14:01, metric 1 MultiRecv [edit] juniper@R1# run clear ospf database [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:21:16 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:21:16 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:23:41 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:23:44 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:14:10, metric 1 MultiRecv [edit] juniper@R1# [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:21:33 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:21:33 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:23:58 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:24:01 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:14:27, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:21:35 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:21:35 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:24:00 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:24:03 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:14:29, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:00:12, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:23:33 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:23:33 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:25:58 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:26:01 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:16:27, metric 1 MultiRecv [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# run show route inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:00:15, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:23:36 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:23:36 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:26:01 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:26:04 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:16:30, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:00:16, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:23:37 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:23:37 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:26:02 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:26:05 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:16:31, metric 1 MultiRecv [edit] juniper@R1# run clear ospf database [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# run show route inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:01:12, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:24:33 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:24:33 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:26:58 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:27:01 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:17:27, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:01:47, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 2.2.2.2/32 *[OSPF/150] 00:00:09, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:25:08 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:25:08 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:27:33 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:27:36 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:18:02, metric 1 MultiRecv [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# run show route inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:03:59, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:27:20 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:27:20 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:29:45 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:29:48 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:20:14, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:04:02, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:27:23 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:27:23 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:29:48 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:29:51 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:20:17, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:04:15, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:27:36 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:27:36 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:30:01 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:30:04 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:20:30, metric 1 MultiRecv [edit] juniper@R1# run clear ospf database [edit] juniper@R1# run show route inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:04:24, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:27:45 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:27:45 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:30:10 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:30:13 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:20:39, metric 1 MultiRecv [edit] juniper@R1# [edit] juniper@R1# run show route 1.1.1.1 inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:07:18, metric 11, tag 0 > to 12.1.1.2 via ge-0/0/0.0 [edit] juniper@R1# run s ^ 's' is ambiguous. Possible completions: save set Set CLI properties, date/time, craft interface message show Show system information ssh Start secure shell on another host start Start shell juniper@R1# run show ospf database ? Possible completions: <[Enter]> Execute this command advertising-router Router ID of advertising router area OSPF area ID asbrsummary Summary AS boundary router link-state advertisements brief Display brief output (default) detail Display detailed output extensive Display extensive output external External link-state advertisements instance Name of OSPF instance link-local Link local link-state advertisements lsa-id Link-state advertisement ID netsummary Summary network link-state advertisements network Network link-state advertisements nssa Not-so-stubby area link-state advertisements opaque-area Opaque area-scope link-state advertisements router Router link-state advertisements summary Display summary output | Pipe through a command [edit] juniper@R1# run show ospf database external 1.1.1.1/32 ^ syntax error. [edit] juniper@R1# run show ospf database external extensive OSPF AS SCOPE link state database Type ID Adv Rtr Seq Age Opt Cksum Len Extern 1.1.1.1 12.1.1.2 0x80000001 469 0x22 0xb9d9 36 mask 255.255.255.255 Topology default (ID 0) Type: 2, Metric: 11, Fwd addr: 0.0.0.0, Tag: 0.0.0.0 Aging timer 00:52:10 Installed 00:03:27 ago, expires in 00:52:11 Last changed 00:03:27 ago, Change count: 1 [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:31:41 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:31:41 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:34:06 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:34:09 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:24:35, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:31:44 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:31:44 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:34:09 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:34:12 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:24:38, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:31:47 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:31:47 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:34:12 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:34:15 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:24:41, metric 1 MultiRecv [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# run clear ospf neighbor [edit] juniper@R1# run clear ospf database [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:32:03 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:32:03 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:34:28 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:34:31 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:24:57, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:35:05 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:35:05 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:37:30 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:37:33 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:27:59, metric 1 MultiRecv [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:35:09 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:35:09 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:37:34 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:37:37 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:28:03, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:35:10 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:35:10 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:37:35 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:37:38 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:28:04, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:35:12 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:35:12 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:37:37 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:37:40 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:28:06, metric 1 MultiRecv [edit] juniper@R1# run clear ospf database [edit] juniper@R1# run show route inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 12.1.1.0/24 *[Direct/0] 00:35:18 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:35:18 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:37:43 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:37:46 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:28:12, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:00:08, metric 12, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:37:04 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:37:04 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:39:29 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:39:32 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:29:58, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:00:36, metric 12, tag 0 > to 12.1.1.2 via ge-0/0/0.0 2.2.2.2/32 *[OSPF/150] 00:00:06, metric 12, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:37:32 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:37:32 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:39:57 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:40:00 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:30:26, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:02:52, metric 12, tag 0 > to 12.1.1.2 via ge-0/0/0.0 2.2.2.2/32 *[OSPF/150] 00:00:07, metric 51, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:39:48 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:39:48 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:42:13 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:42:16 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:32:42, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:02:55, metric 12, tag 0 > to 12.1.1.2 via ge-0/0/0.0 2.2.2.2/32 *[OSPF/150] 00:00:10, metric 51, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:39:51 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:39:51 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:42:16 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:42:19 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:32:45, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:04:46, metric 12, tag 0 > to 12.1.1.2 via ge-0/0/0.0 2.2.2.2/32 *[OSPF/150] 00:02:01, metric 51, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:41:42 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:41:42 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:44:07 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:44:10 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:34:36, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:04:48, metric 12, tag 0 > to 12.1.1.2 via ge-0/0/0.0 2.2.2.2/32 *[OSPF/150] 00:02:03, metric 51, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:41:44 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:41:44 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:44:09 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:44:12 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:34:38, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.1.1/32 *[OSPF/150] 00:04:50, metric 12, tag 0 > to 12.1.1.2 via ge-0/0/0.0 2.2.2.2/32 *[OSPF/150] 00:02:05, metric 51, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:41:46 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:41:46 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:44:11 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:44:14 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:34:40, metric 1 MultiRecv [edit] juniper@R1# run show route inet.0: 8 destinations, 8 routes (8 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 0.0.0.0/0 *[OSPF/150] 00:00:07, metric 100, tag 0 > to 12.1.1.2 via ge-0/0/0.0 1.1.1.1/32 *[OSPF/150] 00:05:30, metric 12, tag 0 > to 12.1.1.2 via ge-0/0/0.0 2.2.2.2/32 *[OSPF/150] 00:02:45, metric 51, tag 0 > to 12.1.1.2 via ge-0/0/0.0 12.1.1.0/24 *[Direct/0] 00:42:26 > via ge-0/0/0.0 12.1.1.1/32 *[Local/0] 00:42:26 Local via ge-0/0/0.0 192.168.128.0/24 *[Direct/0] 3d 06:44:51 > via ge-0/0/3.0 192.168.128.144/32 *[Local/0] 3d 06:44:54 Local via ge-0/0/3.0 224.0.0.5/32 *[OSPF/10] 00:35:20, metric 1 MultiRecv [edit]