Application Acceleration
Highlighted
Application Acceleration

How to configure WXC 3400 HA & its what is the common deployment scenario?

‎08-15-2011 09:34 AM

I have 2 WXCfor HA

1)How to reset & configure WXC for the first time as active unit registration server. How about NTP? Can works without ntp config?

2)How to configure Active-active or active-passive in WXC?

2 REPLIES 2
Highlighted
Application Acceleration

Re: How to configure WXC 3400 HA & its what is the common deployment scenario?

‎08-15-2011 02:43 PM

The process to reset a WXC in documented in the Admin Guide......however for a breif intro...login to the box via SSH or VT100 (console) and issue the command 'load factory-default' and press enter......follow the prompts...you also can add 'load factory-defauly' -pres' to preserver the IP address, suitable for a restore if you are remote from the appliance.

 

The box does not require NTP to work and actually usesd SNTP.

 

Active/Active or Active/Passive is a much deeper conversation beyond the scope of this forum. I suggets you mak contact with your Juniper Partner/Representative for advise and guidance.

Danny Jump
Technical Marketing Manager - Access and Acceleration Business Unit
Highlighted
Application Acceleration

Re: How to configure WXC 3400 HA & its what is the common deployment scenario?

‎08-15-2011 07:04 PM

 

Hi,

 

If you need any assistance with configuring the Active-Active (Clustering) , Active-Backup WXC, you can also open a JTAC case. The JTAC Engineers will also be able to assist you with the configuration.

 

Thanks,

Magesh S.

Juniper Networks

Advanced JTAC Engineer - WX

 

Feedback