I am Planing a image upgaradation in my WX 3400 device, from 220.127.116.11 to 18.104.22.168. Kindly suggest whether i can directly upgrade from 5.4 to 5.7 or we need to follow any upgradation path.(eg:- 5.4 > 5.5>5.6>5.7).
This is the first time I am going to do the juniper WXC image upgradation.I think we can upgrade the image through GUI and CLI. Kindly suggest which method is more suitable for upgrading the image and please share the procedure for upgrading the image through CLI.
I agree with Danny. Upgrading the software image via GUI is the easy method.
In the WXC GUI, goto Admin -> Maintenance -> Load Boot image.
Store the software image on your local hardisk and load it from that.
After the software uplaod is successful, please dont forget to do a Clean Reboot.
If you need to do via the CLI,
1. To upgrade system software from an FTP or TFTP server: upgrade ftp://<IP address>[:username: password]/<path and file name> or: upgrade tftp://<IP address>/<path and file name> 2. Type “y” to confirm upgrading the system software. 3. Reboot the device to activate the new software.
I have Juniper WXC boxes in different location(peer device). Will this create any optimization issue if both the device have different image version. Is this recomented to upgrade the image simultaniously??