Application Acceleration
Highlighted
Application Acceleration

WXC Compression end-points name resolution

‎08-26-2008 01:01 AM

HI!

    I have a little q about subj, some compression end-points in web-interface displayed as ip address and some as hostname, is it some kind of issue?  

1 REPLY 1
Highlighted
Application Acceleration

Re: WXC Compression end-points name resolution

‎08-26-2008 02:27 AM

Hi

Its always good practise to add the active DNS servers to the Juniper device. This can be found under \Device setup\Addresses\DNS servers. (One per line)

 

To view the current DNS settings (Command line)

show -run dns

 

When you have added your DNS server the Juniper will resolved the DNS names after the next polling interval. It will then display the correct name for the IP address.

 

I have seen this many times and it usually happens when a site has been offline for a few days or you add a new site. When I bring the site online and the polling interval pass my DNS names will be pulled in.

 

Hope this helps

 

Andre