Application Acceleration
Application Acceleration

show flow-filter debug-buffer on default option of (no) displays error

‎06-29-2010 03:07 PM

In JWOS 6.0R1.12, the command "show flow-filter debug-buffer" on default option of (no) will display error of "Input not recognised. Please try again."

Select <Enter> on the default option of (no) will display error of Input not recognised. This should return nothing since this is an option for the user to decide to proceed with the operation or not. Below is the output of command:

WX-32.32.32.1>show flow-filter debug-buffer
Processing flow trace buffer might take time, depending upon the number of flows
.
Are you sure you want to proceed [yes,no]? (no)    <-- Press enter key on this default option of "no" and it returns following error message.
Input not recognised. Please try again.

WX-32.32.32.1>show flow-filter debug-buffer
Processing flow trace buffer might take time, depending upon the number of flows
.
Are you sure you want to proceed [yes,no]? (no)no   <-- Typing an option "no" manually will abort the command process
Aborting display...
WX-32.32.32.1>

 

 

Solution

Only the solution is to type "no" manually will abort the process or upgrade to 6.1R1

 

Hope the above is informative.

 

Thanks

 

Sri