Hot off the Press! Announcing Documentation for Junos OS 13.3R1
Jan 27, 2014
Extra! Extra! Read all about it!
We are thrilled to announce the release of our 13.3R1 documentation and wanted to share some highlights with you!
Junos OS, Release 13.3 Software Documentation
Junos OS Release 13.3 is supported on EX Series, M Series, MX Series, PTX Series, and T Series. The 13.3R1 software documentation includes topics on getting started, system administration, features, solutions, APIs, and scripting. You might also notice that our Release Notes are sporting an updated cover complete with a list of new features and devices with links to their descriptions!
OpenFlow is an open standard that lets you use a remote controller to control traffic and run experimental protocols in an existing network. The OpenFlow guides describe how to configure support for OpenFlow 1.0 on devices running Junos OS.
This linked infographic describes subscriber management and services for MX Series routers. The infographic helps you plan your Broadband Edge offerings, select your BNG platform, and select available BNG features.
This reference provides specifications for MX Series line cards including DPCs, MPCs, MICs, FPCs, and PICs. The update of the MX Series Interface Module Reference includes new line cards and features released in Junos OS 13.3.
PTX3000 Packet Transport Router Hardware Guide and Quick Start
The Hardware Guide contains information about the hardware components, planning and safety, hardware installation, initial software configuration, hardware maintenance, and troubleshooting. The Quick Start Guide ships with the router and provides information on how to quickly unpack and install the router, connect devices, power on the router, and initially configure the router. Both documents were updated in Junos OS 13.3 to include AC PSM specifications and installation and connection procedures.
The Layer 2 Circuits Feature Guide for Routing Devices has been renamed VPWS Feature Guide for Routing Devices in Junos OS 13.3. VPWS content has been added to this guide and has been removed from the VPLS Feature Guide for Routing Devices.
SONET/SDH Interfaces Feature Guide for Routing Devices
The SONET/SDH Interfaces Feature Guide for Routing Devices has been transformed and rewritten to expand prescriptive and descriptive content in Junos OS 13.3. Updates include 26 overview topics (from one overview topic), 35 new tasks, two new complex examples, and 1 new verification topic (from 10 simple examples). The revised guide now has more technical depth and breadth.
NCE—Configuring a Dual Stack That Uses DHCPv6 IA_NA and DHCPv6 Prefix Delegation over PPPoE
This NCE describes how service providers can implement IPv4 and IPv6 dual stack in a PPPoE subscriber access network. It also provides a step-by-step configuration example for configuring a dual stack that uses DHCPv6 IA_NA and DHCPv6 prefix delegation over PPPoE.
NCE—Configuring a Dual Stack That Uses NDRA and DHCPv6 Prefix Delegation over PPPoE
This NCE describes how service providers can implement IPv4 and IPv6 dual stack in a Point-to-Point Protocol over Ethernet (PPPoE) subscriber access network. It also provides a step-by-step configuration example for configuring a dual stack that uses Neighbor Discovery Router Advertisement (NDRA) and Dynamic Host Configuration Protocol for IPv6 (DHCPv6) prefix delegation over PPPoE. You learn how to add two types of IPv6 addressing to your subscriber network and then how to create a dual stack implementation that uses these types of addressing. This document assumes that you already have IPv4 running in your network.